PASSENGER CAR T 830

* Automatic tire without lever, the control station located to the right of the machine.

* Without clamping plate, a main shaft allows tightening the wheel through the center, which enables perfect centering, the main shaft can slide horizontally. Which allows to disassemble the wheels 14 to 30 inches.

* The assembly head can rotate 360 degrees and adjusts to the tire for the distance and the correct positioning of the center.

*There are two arms; one upper and one lower on the side of the machine, means of migrating up and down or down and up to allow takeoff heels.

* This bead off device is safer and more reliable.

* A screen to check and control the tire dismantling.

* The bead breaker arm can rotate 360 degrees to the tire and can facilitate the descent of the bead in the groove of the rim during assembly.

* The control console is simple, two buttons to make sure the direction of operation and adjust the angle between the upper or lower disc taking off tire bead.

* The wheel lift allows the help and implementation of large tires, to save working time. There are 6 long rolls ampliation of this wheel lift provide the implementation quick and easy wheel.

* Motor power : 380V/50HZ/3PHZ.

* All our machines are certified to CE norms.