GOLD TOURISM PACK
  • Pack
  • GOLD TOURISM PACK

GOLD TOURISM PACK

€3,995.00
Tax excluded

This pack contains

Quantity
Temporarily unavailable

PASSENGER CAR T 630 ITF

Max. wheel diameter1 200mm
Max. wheel width4 à 15 pouces
Clamping jaws (inside)17 à 30 pouces
Clamping jaws (outside)14 à 26 pouces
* The horizontal arm is formed in a square of 55mm to provide the intensity and endurance.
* The width of the bead breaker arm can be adjusted two step to make sure brake max of 15 inches.
* Pedalboards adopt an anti skid structure to properly maintain the pedals.
* Air booster function for the bonding of the tire bead on the rim for easy inflation of tires overwritten.
* There is an upper arm, which allows to support and facilitate the descent of the bead to the mounting, and there is a lower arm for assisting and facilitating the disassembly of tires and to relieve the operator.
* There is a lifting device to facilitate the implementation of the complete wheel on the clamping plate.
* Motor power: 220V/50HZ/1PHZ.

WHEEL BALANCER W 92

Max. wheel diameter1 100mm
Wheel width1,5 à 20 pouces
Rim diameter1 à 28 pouces
Rotation speed140 tours/minute
Balance precision :+/- 1g
Balancing period : 7 s
Max. wheel weight : 75 kg
*Italian software, easy, precision, widely, energy saving, environment protection.
*5 types of ALU modes and 2 types of smart modes,tyre OPT mode and lead hidden mode.
*LED display with mark buttons, makes it possible to operate intuitively.
*To handle the rim in the range of 1 inch to 28 inch. Without any requirement to the min weight of the tire. The length of the shaft is 300mm, can use for special tires.
*Standard 40mm threaded shaft, which can work with international standardized balancer accessories. Main shaft flange and threaded shaft threads which have been processed through supersonic quenching treatment. It is strong and endurable.
*Optional motorcycle balancing adapter kit is available. With motorcycle balancing mode.
*With standard USB port. It is convenient to Upgrade the newer software.

12 MONTHS WARRANTY ON PARTS.

HC8531/HW9810

Data sheet

Customs code
8479899790

TIRE CHANGER HC 8511

Maximum wheel diameter: 1150 mm
Maximum permissible rim width: 14 inches
Clamping jaws (inside): 12 to 25 inches
Clamping jaws (outside): 10 to 22 inches
Clamping force: 2,500 kg
Operating pressure: 8 ~ 10bar
Noise level
* Motor: 220V/50HZ/1PHZ

♦ Tire changer with pneumatically tiltable tower.
♦ Simultaneous pneumatic locking of horizontal and vertical arms with automatic positioning of the head in the optimal working position.
♦ Head with interchangeable plastic parts for rim protection.
♦ Pneumatic swing arm support column providing high torsional rigidity in all operating positions.
♦ Clockwise and counterclockwise rotation of the turntable through the electric motor.
♦ Front pull-out pedal.
♦ Protective kit for take-off shoe, disassembly head, clamping jaw and lever comes standard.
♦ Tubeless quick tire inflation system with pedal control and bead positioning in the turntable slides.
♦ Pressure reading unit with pressure release button.
♦ Complete with lubrication filter and pressure regulator and limiter.
♦ ROF assist arm: "
Rotating arm with bead pressing block for drop-center rims, for easy mounting and demounting of tires, especially low-profile tires.
"Rim crimping cone for easy wheel clamping.
"Tire lift disc for easy removal of difficult tire and wheel combinations.
" Mid-position roller assists in loosening the second bead













HW 9700 BALANCER

Maximum wheel weight: 65 kgRim diameter
: 8"~ 30 "
Rim width: 2"~ 35 "
Rotational speed: 220 rpmBalance
accuracy: ±
1gMeasuring
time
: 8
secNoise
level
















Shaft diameter of thread: 40 mm

* Motor: 220V / 50HZ / 1PHZ.

♦ Wheel balancer for passenger cars, 4X4, vans and motorcycles.
♦ Microprocessor controlled, with 17 " LCD display.
♦ Laser weight positioning and on-screen display.
♦ Program selection between statistical and dynamic balancing, four ALU programs for alloy wheels or special shape, optimization modes and special motorcycle balancing mode.
♦ SPLIT program.
♦ 3D function with automatic measurement of distance and wheel diameter.
♦ Integrated software for calibration.





12 MONTHS WARRANTY ON PARTS.

The delivery is offered from 150€ HT of purchase, below this sum, a participation of 12.50€ HT will be charged to you for France ,9,50€ HT for Germany, Belgium, Denmark, Luxembourg and for the Netherlands, 20€HT for Spain, Italy and Portugal.

The delivery is offered from 250€HT of purchase, for Austria, Hungary, Ireland, Poland, the Czech Republic, Slovakia, Slovenia and Sweden below this amount, a participation of 20€HT will be charged.

The delivery is offered from 500€HT of purchase, for Switzerland, Litchtenstein below this amount, a participation of 50€ HT will be charged to you, because of a supplement except CE and supply of a pro forma for the customs.

16 other products in the same category: